TECHNICAL BULLETIN: 24001

PRODUCT(S): B4705UINT20 and B4702UNIT20
RELEASE DATE: 09/24/2024
EFFECTIVE DATE: 09/24/2024

ISSUE:
2025+ Ford Interceptor Utility Vehicles now come with the upfitter wiring module as standard equipment. This module interferes with installation of the passenger side Barrier Support Bracket, part number 3BAR472011.

SOLUTION:
Relocate the upfitters module to the front side of the Barrier. Use self-tapping screws to mount the module to the front side of the Barrier.

NOTES:
1. If installing Barrier with Cargo Storage Drawers present, or the intention to install Cargo Storage Drawers in the future, be sure to mount the module above the drawer mounts. The bottom most holes should be at least 7.375” from the bottom of the barrier.

Current Location:

Current Interference:

Solution:
Mount module to front of barrier. Use the slots in the module to center punch 4 holes. Use self-tapping screws to mount the module.

Be sure the holes don’t interfere with the drawer mounts if applicable.